Raise3D launches new FDM 3D printers ahead of Formnext

Raise3D has rolled out the T450 and large-format T700 FDM 3D printing systems ahead of Formnext 2026. The T450 and T700 machines share the same tech platform, are both equipped with an actively heated build chamber and feature build volumes of 450 × 350 × 400 mm and 700 × 500 × 1,000 mm, respectively. Both systems are supported by a 4MD CoreXY system with four frame-mounted motors, designed to reduce vibration, surface ringing and the risk of layer shifts, and the TwinFlow high-flow extrusion technology, which feeds two filament paths into one nozzle, reaching up to 600 mm/s and 80 mm³/s under the reference test conditions [1] , and switches to two materials for soluble supports or dual-colour parts. Air Flow Manager 2 adjusts the chamber by material, holding up to 70°C on the T450 and 60°C on the T700 for large ABS and nylon parts, and switching to directed cooling with an automatic top vent for lower-temperature materials such as PLA. Other features include a 420°C fibre-ready nozzle and a 120°C build plate; camera monitoring; spaghetti, flow and run-out detection; power loss recovery and emergency stop; RFID material identification; mesh levelling; and ideaMaker support. Per Raise3D, the T450 is suitable for the printing of jigs and fixtures, casting patterns, large prototypes and production aids. The T700, meanwhile, is better suited to large tooling, patterns and other large-format applications.